Scooby AIBO - by Genie |
Scooby AIBO is the first Master Studio RCODE program created by Genie.
Supported AIBOs
- - ERS-210 is supported.
- - ERS-220 is supported.
- - ERS-311/312 is supported.
Installation
Required Hardware:
- An ERS-210 model AIBO OR
- An ERS-220 model AIBO OR
- An ERS-31x model AIBO (311 Latte, 312 Macaron or 31L Pug)
- A Pink Programmable Memory Stick (AKA "PMS" or RCode stick) - ERA-MS008 or ERA-MS016, $34->$39
- A memory stick reader to install the software (Use only Sony brand stick readers)
Installation:
- Put an available PMS stick into your computer's stick reader
- Select any folders you see at the root of the stick (usually OPEN-R and CUSTOM) and delete them. Do not format the stick.
- Download the proper RCodePlus runtime for the model of your AIBO.
- For the ERS-210: RCode Plus 2.52 'A' (210)
- For the ERS-220: RCode Plus 2.52 'A' (220)
- For the ERS-31x: RCode Plus 2.52 'A' (31x)
- (Save this .ZIP file on your computer. You may want to use it again later.)
- Unzip this RCodePlus file to the root of your PMS memory stick.
- Download the Scooby Personality: scooby10.zip (1.3MB)
- Unzip that file on top of your RCODE/PMS stick (replacing any files it asks about).
- Put the memory stick inside your AIBO and start it up.
- Play with your AIBO. Follow the instructions (see below).
Usage
Scooby AIBO will stand at attention and wait for voice commands that he recognizes. He will recognize and perform actions to 10 voice commands. If he hears a command that he doesn't recognize, he will walk a few steps, stop and listen again to see if he can hear a word he knows. Voice commands Scooby AIBO understands:- What's your name?
- Hello
- Dance
- Let's Play
- Showtime
- AIBO
- Don't do that
- Morning
- Happy Day
- Show Off