Pooh and Tigger AIBO (210, 220, 31x) |
Pooh Aibo and Tigger Aibo are two themed personalities created by 'teamdax'.
(artwork and other instructions also by teamdax)
Supported AIBOs
- - ERS-210 supported.
- - ERS-220 supported.
- - ERS-311/312 supported.
Required Hardware:
- An ERS-210 model AIBO OR
- An ERS-220 model AIBO OR
- An ERS-31x model AIBO (311 Latte, 312 Macaron or 31L Pug)
- A Pink Programmable Memory Stick (AKA "PMS" or RCode stick) - ERA-MS008 or ERA-MS016, $34->$39
- A memory stick reader to install the software (Use only Sony brand stick readers)
Installation:
- Put an available PMS stick into your computer's stick reader
- Select any folders you see at the root of the stick (usually OPEN-R and CUSTOM) and delete them. Do not format the stick.
- Download the proper RCodePlus runtime for the model of your AIBO.
- For the ERS-210: RCode Plus 2.52 'A' (210)
- For the ERS-220: RCode Plus 2.52 'A' (220)
- For the ERS-31x: RCode Plus 2.52 'A' (31x)
- (Save this .ZIP file on your computer. You may want to use it again later.)
- Unzip this RCodePlus file to the root of your PMS memory stick.
- Download one of the available personalities:
- Pooh: pooh23.zip (~ 1/2 MB)
- Tigger: tigger23.zip (~ 1/2 MB)
- Unzip that file on top of your RCODE/PMS stick (replacing any files it asks about).
- Put the memory stick inside your AIBO and start it up.
- Play with your AIBO. Follow the instructions (see below).